Fixes https://github.com/luau-lang/luau/issues/1515.
By removing these `noexcept`s, we guarantee that the internal call to
`std::swap` uses move semantics when a `Config` is copy-assigned.
mesh-normal-scalar correctly fills sequential values in the output for
triangle cone function, but mesh-normal-vector accidentally reuses the
loop index, which results in writes to every third index of the array
(1, 4, etc.).
This is both slower (as the table turns into a hash map), and incorrect,
especially as we have a scalar version of the benchmark that does the
right thing.
Note: there's a bunch of inefficiencies in the benchmark code that I
have not fixed (around field access mostly, e.g. writing to `v.n` and
then immediately reading it again). These are not ideal for performance,
but they can be valuable to keep as is because this redundancy is common
in real-world code, and it would be nice to see codegen optimizations
eliminating most of that overhead. This one, however, is a straight up
bug, and sparse arrays should not really be the thing this benchmark
hits.
Instead of doing the dot product related math in scalar IR, we lift the
computation into a dedicated IR instruction.
On x64, we can use VDPPS which was more or less tailor made for this
purpose. This is better than manual scalar lowering that requires
reloading components from memory; it's not always a strict improvement
over the shuffle+add version (which we never had), but this can now be
adjusted in the IR lowering in an optimal fashion (maybe even based on
CPU vendor, although that'd create issues for offline compilation).
On A64, we can either use naive adds or paired adds, as there is no
dedicated vector-wide horizontal instruction until SVE. Both run at
about the same performance on M2, but paired adds require fewer
instructions and temporaries.
I've measured this using mesh-normal-vector benchmark, changing the
benchmark to just report the time of the second loop inside
`calculate_normals`, testing master vs #1504 vs this PR, also increasing
the grid size to 400 for more stable timings.
On Zen 4 (7950X), this PR is comfortably ~8% faster vs master, while I
see neutral to negative results in #1504.
On M2 (base), this PR is ~28% faster vs master, while #1504 is only
about ~10% faster.
If I measure the second loop in `calculate_tangent_space` instead, I
get:
On Zen 4 (7950X), this PR is ~12% faster vs master, while #1504 is ~3%
faster
On M2 (base), this PR is ~24% faster vs master, while #1504 is only
about ~13% faster.
Note that the loops in question are not quite optimal, as they store and
reload various vectors to dictionary values due to inappropriate use of
locals. The underlying gains in individual functions are thus larger
than the numbers above; for example, changing the `calculate_normals`
loop to use a local variable to store the normalized vector (but still
saving the result to dictionary value), I get a ~24% performance
increase from this PR on Zen4 vs master instead of just 8% (#1504 is
~15% slower in this setup).
### What's New?
* Fragment Autocomplete: a new API allows for type checking a small
fragment of code against an existing file, significantly speeding up
autocomplete performance in large files.
### New Solver
* E-Graphs have landed: this is an ongoing approach to make the new type
solver simplify types in a more consistent and principled manner, based
on similar work (see: https://egraphs-good.github.io/).
* Adds support for exporting / local user type functions (previously
they were always exported).
* Fixes a set of bugs in which the new solver will fail to complete
inference for simple expressions with just literals and operators.
### General Updates
* Requiring a path with a ".lua" or ".luau" extension will now have a
bespoke error suggesting to remove said extension.
* Fixes a bug in which whether two `Luau::Symbol`s are equal depends on
whether the new solver is enabled.
---
Internal Contributors:
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Hunter Goldstein <hgoldstein@roblox.com>
Co-authored-by: Varun Saini <vsaini@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Closes#1492
Tested and working with the test case in the aforementioned issue, along
with the full defs of luau-lsp with no issues or type errors
In normal Luau files, you can use type aliases and type functions before
they are declared. The same extends to declaration files, **except** in
the new solver. The old solver perfectly allows this, and in fact
intentionally adds it:
db809395bf/Analysis/src/TypeInfer.cpp (L1711-L1717)
This causes *much* headache and pain for external projects that make use
of declaration files; namely, luau-lsp generates them from MaximumADHD's
API dump, which is not ordered by dependency. This means silent
error-types popping up everywhere because types are used before they are
declared. The workaround would be to make code to manually reorder class
definitions based on their dependencies with a bunch of code, but this
is clearly not ideal, and won't work for classes dependent on each
other/recursive.
The solution used here is the same as is used for type aliases - the
name binding for the class is given a blocked type before running the
rest of constraint generation on the block. Questions remain:
- Should the logic be split off of `checkAliases`?
- Should a bound type be used, or should the (blocked) binding type be
directly emplaced with the class type? What are the ramifications of
emplacing with the bound versus the raw type? One ramification was
initially ran into through an assertion because the class
`superTy`/`parent` was bound, and several pieces of code assume it is
not, so it had to be made followed.
- Is folllowing `superTy` to set `parent` the correct workaround for the
assertions thrown, or should the code expecting `parent` to be a
ClassType without following it be modified instead to follow `parent`?
- Should `scope->privateTypeBindings` also be checked for the duplicate
error? I would presume so, since having a class with the same name as a
private alias or type function should error as well?
The extraneous whitespace changes are clang-format ones done
automatically that should've been done in the last release - I can
remove them if necessary and let another sync or OSS cleanup commit fix
it.
Closes#1441
Brings behavior to parity with the old solver by filling in
definitionLocation and definitionModuleName for Luau-consuming
programs/libraries to use.
* New `vector` library! See https://rfcs.luau.org/vector-library.html
for details
* Replace the use of non-portable `strnlen` with `memchr`. `strnlen` is
not part of any C or C++ standard.
* Introduce `lua_newuserdatataggedwithmetatable` for faster tagged
userdata creation of userdata with metatables registered with
`lua_setuserdatametatable`
Old Solver
* It used to be the case that a module's result type would
unconditionally be inferred to be `any` if it imported any module that
participates in any import cycle. This is now fixed.
New Solver
* Improve inference of `table.freeze`: We now infer read-only properties
on tables after they have been frozen.
* We now correctly flag cases where `string.format` is called with 0
arguments.
* Fix a bug in user-defined type functions where table properties could
be lost if the table had a metatable
* Reset the random number seed for each evaluation of a type function
* We now retry subtyping arguments if it failed due to hidden variadics.
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Vighnesh <vvijay@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Co-authored-by: Junseo Yoo <jyoo@roblox.com>
## What's new
* Added `math.map` function to the standard library, based on
https://rfcs.luau-lang.org/function-math-map.html
* `FileResolver` can provide an implementation of
`getRequireSuggestions` to provide auto-complete suggestions for
require-by-string
## New Solver
* In user-defined type functions, `readproperty` and `writeproperty`
will return `nil` instead of erroring if property is not found
* Fixed incorrect scope of variadic arguments in the data-flow graph
* Fixed multiple assertion failures
---
Internal Contributors:
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Hunter Goldstein <hgoldstein@roblox.com>
Co-authored-by: Varun Saini <vsaini@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
# General Updates
Fix an old solver crash that occurs in the presence of cyclic
`requires()`
## New Solver
- Improvements to Luau user-defined type function library
- Avoid asserting on unexpected metatable types
- Properties in user defined type functions should have a consistent
iteration order - in this case it is insertion ordering
# Runtime
- Track VM allocations for telemetry
---
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Hunter Goldstein <hgoldstein@roblox.com>
Co-authored-by: James McNellis <jmcnellis@roblox.com>
Co-authored-by: Varun Saini <vsaini@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Co-authored-by: Junseo Yoo <jyoo@roblox.com>
Noticed while using luau-ast that function attributes aren't included in
the output. This PR corrects that.
---------
Co-authored-by: vegorov-rbx <75688451+vegorov-rbx@users.noreply.github.com>
Closes#1460.
This renames the `type` field of `AstStatTypeAlias` to `value` during
the JSON encoding process.
I've chosen to just rename the field in the JSON encoder rather than
rename the actual field since it's a lot further reaching. Another
option would have been to rename what the actual type of an AST node is
written to be something like `tokenType` instead of `type`, but that's a
bigger diff and technically breaking (as opposed to this one which
isn't!)
# General Updates
* Fix some cases where documentation symbols would not be available when
mouseovering at certain positions in the code
* Scaffolding to help embedders have more control over how `typeof(x)`
refines types
* Refinements to require-by-string semantics. See
https://github.com/luau-lang/rfcs/pull/56 for details.
* Fix for https://github.com/luau-lang/luau/issues/1405
# New Solver
* Fix many crashes (thanks you for your bug reports!)
* Type functions can now call each other
* Type functions all evaluate in a single VM. This should improve
typechecking performance and reduce memory use.
* `export type function` is now forbidden and fails with a clear error
message
* Type functions that access locals in the surrounding environment are
now properly a parse error
* You can now use `:setindexer(types.never, types.never)` to delete an
indexer from a table type.
# Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Hunter Goldstein <hgoldstein@roblox.com>
Co-authored-by: Varun Saini <vsaini@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
In this update, we continue to improve the overall stability of the new
type solver. We're also shipping some early bits of two new features,
one of the language and one of the analysis API: user-defined type
functions and an incremental typechecking API.
If you use the new solver and want to use all new fixes included in this
release, you have to reference an additional Luau flag:
```c++
LUAU_DYNAMIC_FASTINT(LuauTypeSolverRelease)
```
And set its value to `645`:
```c++
DFInt::LuauTypeSolverRelease.value = 645; // Or a higher value for future updates
```
## New Solver
* Fix a crash where scopes are incorrectly accessed cross-module after
they've been deallocated by appropriately zeroing out associated scope
pointers for free types, generic types, table types, etc.
* Fix a crash where we were incorrectly caching results for bound types
in generalization.
* Eliminated some unnecessary intermediate allocations in the constraint
solver and type function infrastructure.
* Built some initial groundwork for an incremental typecheck API for use
by language servers.
* Built an initial technical preview for [user-defined type
functions](https://rfcs.luau-lang.org/user-defined-type-functions.html),
more work still to come (including calling type functions from other
type functions), but adventurous folks wanting to experiment with it can
try it out by enabling `FFlag::LuauUserDefinedTypeFunctionsSyntax` and
`FFlag::LuauUserDefinedTypeFunction` in their local environment. Special
thanks to @joonyoo181 who built up all the initial infrastructure for
this during his internship!
## Miscellaneous changes
* Fix a compilation error on Ubuntu (fixes#1437)
---
Internal Contributors:
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Hunter Goldstein <hgoldstein@roblox.com>
Co-authored-by: Jeremy Yoo <jyoo@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh <vvijay@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Co-authored-by: Junseo Yoo <jyoo@roblox.com>
In this update we improve overall stability of the new type solver and
address some type inference issues with it.
If you use the new solver and want to use all new fixes included in this
release, you have to reference an additional Luau flag:
```c++
LUAU_DYNAMIC_FASTINT(LuauTypeSolverRelease)
```
And set its value to `644`:
```c++
DFInt::LuauTypeSolverRelease.value = 644; // Or a higher value for future updates
```
## New Solver
* Fixed a debug assertion failure in autocomplete (Fixes#1391)
* Fixed type function distribution issue which transformed `len<>` and
`unm<>` into `not<>` (Fixes#1416)
* Placed a limit on the possible normalized table intersection size as a
temporary measure to avoid hangs and out-of-memory issues for complex
type refinements
* Internal recursion limits are now respected in the subtyping
operations and in autocomplete, to avoid stack overflow crashes
* Fixed false positive errors on assignments to tables whose indexers
are unions of strings
* Fixed memory corruption crashes in subtyping of generic types
containing other generic types in their bounds
---
Internal Contributors:
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Github has deprecated `v1` and `v2` of `actions/upload-artifact` which
causes occassional CI failures and will affect our ability to make new
releases in the future. This PR updates the version used in
`release.yml`.
Fix for https://github.com/luau-lang/luau/issues/1406
While it is good to let ``index`` wait for the pending-expansion. To
re-produce the issue you need more than just this code:
https://i.imgur.com/b3OmUGF.png
It needs this, else it won't crash.
```lua
local function ProblemCauser(key: Keys, value)
PlayerData[key] = value
end
```
But regarding "pending things", I'd recommend **generalized functions**
for sanity checks like these, since there will be more cases of similar
issues I believe. But I am 100% sure that eventually this issue here can
maybe be prevented if looking at the Constraints. _(And optimization)_
Not sure if ``index`` needs the table fully completed, or if it is
preferred that the info is available based on **how much info is
available at the current position in the code**.
But if this gets done, I hope that they'll be connected to the Solver
Logger, because I actually refined mine with colors and more info _(yet
need to finish that)_ to understand the Luau Source Code more and to
debug issues.
---------
Co-authored-by: aaron <aweiss@hey.com>
Fixes https://github.com/luau-lang/luau/issues/1387
Was suggested by @alexmccord
I changed ``singletons[0]`` to ``singletons.front()``, unsure if that
makes a huge difference, and then I added the rest of the things needed
for the return type.
Maybe it's also the ideal location since doing it before looping through
``keys`` won't add the string into the type arena.
I put comments next to it based on how I thought it would make sense.
``LUAU_ASSERT`` seems to trigger when there's only one entry being put
inside a UnionType. It's as if it was put there for quality.
Allow edits by maintainers is enabled.
I tested this with a quick Unit Test something like
```lua
local test: keyof<typeof({a="test"})>
```
## New Solver
* The type functions `keyof` and `index` now also walk the inheritance
chain when they are used on class types like Roblox instances.
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
### What's new
* Light update this week, mostly fast flag cleanups.
### New Solver
* Rename flag to enable new solver from
`DebugLuauDeferredConstraintResolution` to `LuauSolverV2`
* Added support for magic functions for the new type checker (as opposed
to the type inference component)
* Improved handling of `string.format` with magic function improvements
* Cleaning up some of the reported errors by the new type checker
* Minor refactoring of `TypeChecker2.cpp` that happens to make the diff
very hard to read.
---
### Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh <vvijay@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Co-authored-by: Junseo Yoo <jyoo@roblox.com>
### What's new
* Fixed many of the false positive errors in indexing of table unions
and table intersections
* It is now possible to run custom checks over Luau AST during
typechecking by setting `customModuleCheck` in `FrontendOptions`
* Fixed codegen issue on arm, where number->vector cast could corrupt
that number value for the next time it's read
### New Solver
* `error` type now behaves as the bottom type during subtyping checks
* Fixed the scope that is used in subtyping with generic types
* Fixed `astOriginalCallTypes` table often used by LSP to match the old
solver
---
### Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Bumps [jinja2](https://github.com/pallets/jinja) from 3.1.3 to 3.1.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/pallets/jinja/releases">jinja2's
releases</a>.</em></p>
<blockquote>
<h2>3.1.4</h2>
<p>This is the Jinja 3.1.4 security release, which fixes security issues
and bugs but does not otherwise change behavior and should not result in
breaking changes.</p>
<p>PyPI: <a
href="https://pypi.org/project/Jinja2/3.1.4/">https://pypi.org/project/Jinja2/3.1.4/</a>
Changes: <a
href="https://jinja.palletsprojects.com/en/3.1.x/changes/#version-3-1-4">https://jinja.palletsprojects.com/en/3.1.x/changes/#version-3-1-4</a></p>
<ul>
<li>The <code>xmlattr</code> filter does not allow keys with
<code>/</code> solidus, <code>></code> greater-than sign, or
<code>=</code> equals sign, in addition to disallowing spaces.
Regardless of any validation done by Jinja, user input should never be
used as keys to this filter, or must be separately validated first.
GHSA-h75v-3vvj-5mfj</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pallets/jinja/blob/main/CHANGES.rst">jinja2's
changelog</a>.</em></p>
<blockquote>
<h2>Version 3.1.4</h2>
<p>Released 2024-05-05</p>
<ul>
<li>The <code>xmlattr</code> filter does not allow keys with
<code>/</code> solidus, <code>></code>
greater-than sign, or <code>=</code> equals sign, in addition to
disallowing spaces.
Regardless of any validation done by Jinja, user input should never be
used
as keys to this filter, or must be separately validated first.
:ghsa:<code>h75v-3vvj-5mfj</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="dd4a8b5466"><code>dd4a8b5</code></a>
release version 3.1.4</li>
<li><a
href="0668239dc6"><code>0668239</code></a>
Merge pull request from GHSA-h75v-3vvj-5mfj</li>
<li><a
href="d655030770"><code>d655030</code></a>
disallow invalid characters in keys to xmlattr filter</li>
<li><a
href="a7863ba9d3"><code>a7863ba</code></a>
add ghsa links</li>
<li><a
href="b5c98e78c2"><code>b5c98e7</code></a>
start version 3.1.4</li>
<li><a
href="da3a9f0b80"><code>da3a9f0</code></a>
update project files (<a
href="https://redirect.github.com/pallets/jinja/issues/1968">#1968</a>)</li>
<li><a
href="0ee5eb41d1"><code>0ee5eb4</code></a>
satisfy formatter, linter, and strict mypy</li>
<li><a
href="20477c6357"><code>20477c6</code></a>
update project files (<a
href="https://redirect.github.com/pallets/jinja/issues/5457">#5457</a>)</li>
<li><a
href="e491223739"><code>e491223</code></a>
update pyyaml dev dependency</li>
<li><a
href="36f98854c7"><code>36f9885</code></a>
fix pr link</li>
<li>Additional commits viewable in <a
href="https://github.com/pallets/jinja/compare/3.1.3...3.1.4">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/luau-lang/luau/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [jinja2](https://github.com/pallets/jinja) from 3.1.2 to 3.1.3.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/pallets/jinja/releases">jinja2's
releases</a>.</em></p>
<blockquote>
<h2>3.1.3</h2>
<p>This is a fix release for the 3.1.x feature branch.</p>
<ul>
<li>Fix for <a
href="https://github.com/pallets/jinja/security/advisories/GHSA-h5c8-rqwp-cp95">GHSA-h5c8-rqwp-cp95</a>.
You are affected if you are using <code>xmlattr</code> and passing user
input as attribute keys.</li>
<li>Changes: <a
href="https://jinja.palletsprojects.com/en/3.1.x/changes/#version-3-1-3">https://jinja.palletsprojects.com/en/3.1.x/changes/#version-3-1-3</a></li>
<li>Milestone: <a
href="https://github.com/pallets/jinja/milestone/15?closed=1">https://github.com/pallets/jinja/milestone/15?closed=1</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pallets/jinja/blob/main/CHANGES.rst">jinja2's
changelog</a>.</em></p>
<blockquote>
<h2>Version 3.1.3</h2>
<p>Released 2024-01-10</p>
<ul>
<li>Fix compiler error when checking if required blocks in parent
templates are
empty. :pr:<code>1858</code></li>
<li><code>xmlattr</code> filter does not allow keys with spaces.
GHSA-h5c8-rqwp-cp95</li>
<li>Make error messages stemming from invalid nesting of <code>{% trans
%}</code> blocks
more helpful. :pr:<code>1918</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d9de4bb215"><code>d9de4bb</code></a>
release version 3.1.3</li>
<li><a
href="50124e1656"><code>50124e1</code></a>
skip test pypi</li>
<li><a
href="9ea7222ef3"><code>9ea7222</code></a>
use trusted publishing</li>
<li><a
href="da703f7aae"><code>da703f7</code></a>
use trusted publishing</li>
<li><a
href="bce1746925"><code>bce1746</code></a>
use trusted publishing</li>
<li><a
href="7277d8068b"><code>7277d80</code></a>
update pre-commit hooks</li>
<li><a
href="5c8a105224"><code>5c8a105</code></a>
Make nested-trans-block exceptions nicer (<a
href="https://redirect.github.com/pallets/jinja/issues/1918">#1918</a>)</li>
<li><a
href="19a55db3b4"><code>19a55db</code></a>
Make nested-trans-block exceptions nicer</li>
<li><a
href="716795349a"><code>7167953</code></a>
Merge pull request from GHSA-h5c8-rqwp-cp95</li>
<li><a
href="7dd3680e6e"><code>7dd3680</code></a>
xmlattr filter disallows keys with spaces</li>
<li>Additional commits viewable in <a
href="https://github.com/pallets/jinja/compare/3.1.2...3.1.3">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/luau-lang/luau/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# What's Changed?
- Variety of bugfixes in the new solver
## New Solver
- Fix an issue where we would hit a recursion limit when applying long
chains of type refinements.
- Weaken the types of `table.freeze` and `table.clone` in the new solver
so we can accept common code patterns like `local a = table.freeze({x=5,
x=0})` at the expense of accepting code like `table.freeze(true)`.
- Don't warn when the # operator is used on a value of type never
## VM
- Fix a bug in lua_resume where too many values might be removed from
stack when resume throws an error
---
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Co-authored-by: Junseo Yoo <jyoo@roblox.com>
New Solver
* Fix some type inference issues surrounding updates to upvalues eg
```luau
local x = 0
function f()
x = x + 1
end
```
* User-defined type function progress
* Bugfixes for normalization of negated class types. eg `SomeClass &
(class & ~SomeClass)`
* Fixes to subtyping between tables and the top `table` type.
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Vighnesh <vvijay@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Co-authored-by: Junseo Yoo <jyoo@roblox.com>
# What's Changed?
- Code refactoring with a new clang-format
- More bug fixes / test case fixes in the new solver
## New Solver
- More precise telemetry collection of `any` types
- Simplification of two completely disjoint tables combines them into a
single table that inherits all properties / indexers
- Refining a `never & <anything>` does not produce type family types nor
constraints
- Silence "inference failed to complete" error when it is the only error
reported
---
### Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Dibri Nsofor <dnsofor@roblox.com>
Co-authored-by: Jeremy Yoo <jyoo@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh <vvijay@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
I found that Luau failed to build on the devkitPro toolchain for 3DS.
This target uses an ILP32 model, and `int32_t` is an alias of `long`.
`BytecodeBuilder.cpp` includes a line where an `int` is passed by
reference to a function expecting an `int32_t`.
# What's Changed?
- Telemetry support for usage of any type in old/new solver
- Bug fixes and flag removals with the new solver
## New Solver
- Fixed constraint ordering bug to infer types more accurately
- Improved inferring a call to `setmetatable()`
## VM
- Restored global metatable lookup for `typeof` on lightuserdata to fix
unintentional API change (Fixes#1335)
---
### Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Dibri Nsofor <dnsofor@roblox.com>
Co-authored-by: Jeremy Yoo <jyoo@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh <vvijay@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
# What's Changed?
- Bugfixes in the new solver
## New Solver
- Equality graphs(E-Graphs) data structures were added
- Refactored even more instances of "type family" with "type function"
- `table.insert` no longer spuriously warns while selecting an overload
for reasonable arguments.
- Add time tracing for the new solver
- Miscellaneous fixes to unit tests
---
### Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Jeremy Yoo <jyoo@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
Co-authored-by: Junseo Yoo <jyoo@roblox.com>
Working towards a full e-graph implementation as described by the [egg
paper](https://arxiv.org/pdf/2004.03082).
The type system has a couple of places where e-graphs would've been
useful and solved some classes of problems trivially. For example:
1. Normalization and simplification cannot handle cyclic types due to
the nature of their implementation.
2. Normalization can't tell when two tables or functions are equivalent,
but simplification theoretically can albeit not implemented.
3. Normalization requires deep normalization for inhabitance check,
whereas simplification would've returned the `never` type itself
indicating uninhabited.
4. Simplification requires constraint ordering to have perfect timing to
simplify.
5. Adding a rewrite rule requires implementing it twice, once in
simplification and once again in normalization with completely different
code design making it hard to verify that their behavior is materially
equivalent.
6. In cases where we must cache for performance, two different types
that are isomorphic have different cache entries resulting in cache
misses.
7. Type family reduction can handle cyclic type families, but only if
the cycle is not obscured by a different type family instance. (`t1
where t1 = union<number, add<t1, number>>` is irreducible)
I think we're getting the point!
---
Currently the implementation is missing a few features that makes
e-graphs actually useful. Those will be coming in a future PR.
1. Pattern matching,
6. Applying rewrites,
7. Rewrite until saturation, and
8. Extracting the best e-node according to some cost function.
# What's Changed?
- Performance improvement in the old solver
- Bugfixes in the new solver
## Old Solver
- Mark types that do not need instantiation when being exported to
prevent unnecessary work from being done
## New Solver
- Refactored instances of "type family" with "type function"
- Index-out-of-bounds bug fix in the resolution resolver
- Subtyping reasonings are merged only if all failed
---
### Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh <vvijay@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
The description of SUBRK/DIVRK is out of sync with the VM code.
Comment:
```cpp
// SUBRK, DIVRK: compute arithmetic operation between the constant and a source register and put the result into target register
// A: target register
// B: source register
// C: constant table index (0..255); must refer to a number
LOP_SUBRK,
LOP_DIVRK,
```
VM snippet:
```cpp
VM_CASE(LOP_DIVRK)
{
Instruction insn = *pc++;
StkId ra = VM_REG(LUAU_INSN_A(insn));
TValue* kv = VM_KV(LUAU_INSN_B(insn));
StkId rc = VM_REG(LUAU_INSN_C(insn));
...
```
Right now, the commentLocations are not transferred over to the
SourceModule for definition files, like they are for normal source
modules. This means we lose out on finding documentation comments. We
add that in here
https://github.com/luau-lang/luau/issues/1137#issuecomment-2212413633
# What's Changed?
- Mostly stability and bugfixes with the new solver.
## New Solver
- Typechecking with the new solver should respect the no-check hot
comment.
- Record type alias locations and property locations of table
assignments
- Maintain location information for exported table types
- Stability fixes for normalization
- Report internal constraint solver errors.
---
### Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
# What's Changed?
- Fix#1137 by appropriately retaining additional metadata from
definition files throughout the type system.
- Improve Frontend for LSPs by appropriately allowing the cancellation
of typechecking while running its destructor.
## New Solver
- Added support for the `rawget` type function.
- Reduced overall static memory usage of builtin type functions.
- Fixed a crash where visitors could mutate a union or intersection type
and fail to invalidate iteration over them in doing so.
- Revised autocomplete functionality to not rely on a separate run of
the type solver when using the new solver.
- Implemented a more relaxed semantic rule for casting.
- Fixed some smaller crashes in the new solver.
## Native Code Generation
- Add additional codegen specialization for `math.sign`
- Cleaned up a large number of outstanding fflags in the code.
### Internal Contributors
Co-authored-by: Aaron Weiss <aaronweiss@roblox.com>
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: James McNellis <jmcnellis@roblox.com>
Co-authored-by: Jeremy Yoo <jyoo@roblox.com>
Co-authored-by: Vighnesh Vijay <vvijay@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
---------
Co-authored-by: Alexander McCord <amccord@roblox.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
Co-authored-by: Vighnesh <vvijay@roblox.com>
Co-authored-by: Aviral Goel <agoel@roblox.com>
Co-authored-by: David Cope <dcope@roblox.com>
Co-authored-by: Lily Brown <lbrown@roblox.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
