* `table.sort` was improved further. It now guarentees N*log(N) time
complexity in the worst case.
* Fix https://github.com/Roblox/luau/issues/880
We are also working on fixing final bugs and crashes in the new type
solver.
On the CodeGen front we have a few things going on:
* We have a smarter register allocator for the x86 JIT
* We lower more instructions on arm64
* The vector constructor builtin is now translated to IR
---------
Co-authored-by: Arseny Kapoulkine <arseny.kapoulkine@gmail.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
* A small subset of control-flow refinements have been added to
recognize type options that are unreachable after a
conditional/unconditional code block. (Fixes
https://github.com/Roblox/luau/issues/356).
Some examples:
```lua
local function f(x: string?)
if not x then return end
-- x is 'string' here
end
```
Throwing calls like `error` or `assert(false)` instead of 'return' are
also recognized.
Existing complex refinements like type/typeof and tagged union checks
are expected to work, among others.
To enable this feature, `LuauTinyControlFlowAnalysis` exclusion has to
be removed from `ExperimentalFlags.h`.
If will become enabled unconditionally in the near future.
* Linter has been integrated into the typechecker analysis so that
type-aware lint warnings can work in any mode
`Frontend::lint` methods were deprecated, `Frontend::check` has to be
used instead with `runLintChecks` option set.
Resulting lint warning are located inside `CheckResult`.
* Fixed large performance drop and increased memory consumption when
array is filled at an offset (Fixes
https://github.com/Roblox/luau/issues/590)
* Part of [Type error suppression
RFC](https://github.com/Roblox/luau/blob/master/rfcs/type-error-suppression.md)
was implemented making subtyping checks with `any` type transitive.
---
In our work on the new type-solver:
* `--!nocheck` mode no longer reports type errors
* New solver will not be used for `--!nonstrict` modules until all
issues with strict mode typechecking are fixed
* Added control-flow aware type refinements mentioned earlier
In native code generation:
* `LOP_NAMECALL` has been translated to IR
* `type` and `typeof` builtin fastcalls have been translated to
IR/assembly
* Additional steps were taken towards arm64 support
* Fix#817
* Fix#850
* Optimize math.floor/ceil/round with SSE4.1
* Results in a ~7-9% speedup on the math-cordic benchmark.
* Optimized table.sort.
* table.sort is now ~4.1x faster (when not using a predicate) and ~2.1x
faster when using a simple predicate. Performance may improve further in
the future.
* Reorganize the memory ownership of builtin type definitions.
* This is a small initial step toward affording parallel typechecking.
The new type solver is coming along nicely. We are working on fixing
crashes and bugs.
A few major changes to native codegen landed this week:
* Fixed lowering of Luau IR mod instruction when first argument is a
constant
* Added VM register data-flow/capture analysis
* Fixed issues with optimizations in unreachable blocks
---------
Co-authored-by: Arseny Kapoulkine <arseny.kapoulkine@gmail.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
We've made a few small changes to reduce the amount of stack we use when
typechecking nested method calls (eg `foo:bar():baz():quux()`).
We've also fixed a small bytecode compiler issue that caused us to emit
redundant jump instructions in code that conditionally uses `break` or
`continue`.
On the new solver, we've switched to a new, better way to handle
augmentations to unsealed tables. We've also made some substantial
improvements to type inference and error reporting on function calls.
These things should both be on par with the old solver now.
The main improvements to the native code generator have been elimination
of some redundant type tag checks. Also, we are starting to inline
particular fastcalls directly to IR.
---------
Co-authored-by: Arseny Kapoulkine <arseny.kapoulkine@gmail.com>
Co-authored-by: Vyacheslav Egorov <vegorov@roblox.com>
This week we only have updates to new type solver and JIT. Both projects
are still in the process of being built out. Neither are ready for
general use yet.
In the new solver, we fixed issues with recursive type aliases.
Duplicated type parameters are once again reported, exported types are
being recorder and function argument names are placed inside function
types.
We also made improvements to restore parts of bidirectional type
tracking.
On native code generation side, namecall instruction lowering was fixed,
we fixed inconsistencies in IR command definitions and added utility
function to help with constant folding.
* The AST JSON encoder will now stringify infinity and NaN according to the JSON5 spec using the tokens `Infinity`, `-Infinity`, and `NaN`.
* Improve autocompletion of table keys if the type of that key is a union of string singletons.
* Reduce the stack utilization of type checking.
* Improve the error message that's reported when a delimiting comma is
missing from a table literal. eg
```lua
local t = {
first = 1
second = 2
}```
* https://github.com/Roblox/luau/pull/719
* Improved `Failed to unify type packs` error message to be reported as
`Type pack 'X' could not be converted into 'Y'`
* https://github.com/Roblox/luau/pull/722
* 1% reduction in executed instruction count by removing a check in fast
call dispatch
* Additional fixes to reported error location of OOM errors in VM
* Improve `math.sqrt`, `math.floor` and `math.ceil` performance on
additional compilers and platforms (1-2% geomean improvement including
8-9% on math-cordic)
* All thrown exceptions by Luau analysis are derived from
`Luau::InternalCompilerError`
* When a call site has fewer arguments than required, error now reports
the location of the function name instead of the argument to the
function
* https://github.com/Roblox/luau/pull/724
* Fixed https://github.com/Roblox/luau/issues/725
Co-authored-by: Arseny Kapoulkine <arseny.kapoulkine@gmail.com>
Co-authored-by: Andy Friesen <afriesen@roblox.com>
* Support `["prop"]` syntax on class definitions in definition files.
(#704)
* Improve type checking performance for complex overloaded functions
* Fix rare cases of incorrect stack traces for out of memory errors at
runtime
* Reoptimized math.min/max/bit32 builtins assuming at least 2 arguments are used (1-2% lift on some benchmarks)
* Type errors that mention function types no longer have redundant parenthesis around return type
* Luau REPL now supports --compile=remarks which displays the source code with optimization remarks embedded as comments
* Builtin calls are slightly faster when called with 1-2 arguments (~1% improvement in some benchmarks)
- Fix rare type checking bugs with invalid generic types escaping the
module scope
- Fix type checking of variadic type packs in certain cases
- Implement type normalization, which resolves a large set of various
issues with unions/intersections in type checker
- Improve parse errors for trailing commas in function calls and type
lists
- Reduce profiling skew when using --profile with very high frequencies
- Improve performance of `lua_getinfo` (`debug.info`, `debug.traceback`
and profiling overhead are now 20% faster/smaller)
- Improve performance of polymorphic comparisons (1-2% lift on some
benchmarks)
- Improve performance of closure creation (1-2% lift on some benchmarks)
- Improve string comparison performance (4% lift on string sorting)
- Type aliases can no longer override primitive types; attempts to do
that will result in a type error
- Fix misleading type error messages for mismatches in expression list
length during assignment
- Fix incorrect type name display in certain cases
- setmetatable/getmetatable are now ~2x faster
- tools/perfstat.py can be used to display statistics about profiles
captured via --profile switch
This change adds another file for benchmarking luau-analyze and sets up
benchmarks for both non-strict/strict modes for analysis and all three
optimization levels for compilation performance.
To avoid issues with race conditions on repository update we do all this
in the same job in benchmark.yml.
To be able to benchmark both modes from a single file, luau-analyze
gains --mode argument which allows to override the default typechecking
mode. Not sure if we'll want this to be a hard override on top of the
module-specified mode in the future, but this works for now.
Since callgrind allows to control stats collection from the guest, this
allows us to reset the collection right before the benchmark starts.
This change exposes this to the benchmark runner and integrates
callgrind data parsing into bench.py, so that we can run bench.py with
--callgrind argument and, as long as the runner was built with callgrind
support, we get instruction counts from the run.
We convert instruction counts to seconds using 10G instructions/second
rate; there's no correct way to do this without simulating the full CPU
pipeline but it results in time units on a similar scale to real runs.
Adds a `luau-ast` CLI that dumps Luau source to JSON. @asajeffrey and I are planning to use this functionality to construct an Agda model of the Luau type system/operational semantics, to allow formally proving properties of Luau's type systems.
- Improve refinement support for unions, in particular it's now possible to implement tagged unions as a union of tables where individual branches use a string literal type for one of the fields.
- Fix `string.split` type information
- Optimize `select(_, ...)` to run in constant time (~2.7x faster on VariadicSelect benchmark)
- Improve debug line information for multi-line assignments
- Improve compilation of table literals when table keys are constant expressions/variables
- Use forward GC barrier for `setmetatable` which slightly accelerates GC progress
- TableOperations lint now includes a warning for table.create(N, {}) (which is likely a mistake since the table is shared by all entries)
- Type checker now type checks #v when v is a union
- Parser now rejects sources that consists of a single unfinished long comment
- Work around significant MSVC 2022 performance regression, bringing it more or less in line with MSVC 2019
- Compiler now predicts array size for newly allocated tables when the table is filled in a short loop
- Small improvements in compilation throughput (~2% faster)
- Implement paged sweeper for GC which improves sweep throughput 2-3x and reduces memory consumption by 8 bytes per object (once it is stabilized we will see additional 8 bytes per object of savings)
- Improve Repl Tab completion
- Repl now supports -i (interactive mode to run code in context of a script's environment) and -On (to control optimization flags)
- Rework transaction log used for type checking which should result in more robust type checking internals with fewer bugs
- Reduce the amount of memory consumed by type checker on large module graphs
- Type checker now errors on attempts to change the type of imported module fields
- The return type of newproxy is now any (fixes#296)
- Implement new number printing algorithm (Schubfach) which makes tostring() produce precise (round-trippable) and short decimal output up to 10x faster
- Fix lua_Debug::linedefined to point to the line with the function definition instead of the first statement (fixes#265)
- Fix minor bugs in Tab completion in Repl
- Repl now saves/restores command history in ~/.luau_history
This doesn't contain all changes for 507 yet but we might want to do the
Luau 0.507 release a bit earlier to end the year sooner.
Changes:
- Type ascription (::) now permits casts between related types in both directions, allowing to refine or loosen the type (RFC #56)
- Fix type definition for tonumber to return number? since the input string isn't guaranteed to contain a valid number
- Fix type refinements for field access via []
- Many stability fixes for type checker
- Provide extra information in error messages for type mismatches in more cases
- Improve performance of type checking for large unions when union members are string literals
- Add coverage reporting support to Repl (--coverage command line argument) and lua_getcoverage C API
- Work around code signing issues during Makefile builds on macOS
- Improve performance of truthiness checks in some cases, particularly on Apple M1, resulting in 10-25% perf gains on qsort benchmark depending on the CPU/compiler
- Fix support for little-endian systems; IBM s390x here we go!
- Fix some cases where type checking would overflow the native stack
- Improve autocomplete behavior when assigning a partially written function call (not currently exposed through command line tools)
- Improve autocomplete type inference feedback for some expressions where previously the type would not be known
- Improve quantification performance during type checking for large types
- Improve type checking for table literals when the expected type of the table is known because of a type annotation
- Fix type checking errors in cases where required module has errors in the resulting type
- Fix debug line information for multi-line chained call sequences (Add function name information for "attempt to call a nil value" #255)
- lua_newuserdata now takes 2 arguments to match Lua/LuaJIT APIs better; lua_newuserdatatagged should be used if the third argument was non-0.
- lua_ref can no longer be used with LUA_REGISTRYINDEX to prevent mistakes when migrating Lua FFI (Inconsistency with lua_ref #247)
- Fix assertions and possible crashes when executing script code indirectly via metatable dispatch from lua_equal/lua_lessthan/lua_getfield/etc. (Hitting a crash in an assert after lua_equal is called. #259)
- Fix flamegraph scripts to run under Python 2
- Improve error recovery during type checking
- Initial (not fully complete) implementation for singleton types (RFC RFC: Singleton types #37)
- Implement a C-friendly interface for compiler (luacode.h)
- Remove C++ features from lua.h (removed default arguments from luau_load and lua_pushcfunction)
- Fix lua_breakpoint behavior when enabled=false
- Implement coroutine.close (RFC RFC: coroutine.close #88)
Note, this introduces small breaking changes in lua.h:
- luau_load env argument is now required, pass an extra 0
- lua_pushcfunction now must be called with 3 arguments; if you were calling it with 2 arguments, pass an extra NULL; if you were calling it with 4, use lua_pushcclosure.
These changes are necessary to make sure lua.h can be used from pure C - the future release will make it possible by adding an option to luaconf.h to change function name mangling to be C-compatible. We don't anticipate breaking the FFI interface in the future, but this change was necessary to restore C compatibility.
Closes#121Fixes#213
- Type mismatch errors now show detailed information for compound types, highlighting the mismatching component
- Fix string.pack bug on ARM when packing negative numbers using unsigned formats
- Implement bit32.countlz/countrz (RFC RFC: bit32.countlz/countrz #89)
- Minor compiler throughput optimization (~2% faster compilation)
- Improve transpiler behavior for edge cases and better test coverage (not exposed through CLI at the moment)
- Improve error recovery when parsing invalid assignments
- Build fixes for fuzzing targets
As discussed in the issue, Luau has evolved from Lua to the point
where a new default extension `.luau` would be needed.
This change makes the REPL and Analyze look for `.luau`
extension first and if not found, fall back to `.lua`.
Changes:
- Support for time tracing for analysis/compiler (not currently exposed
through CLI)
- Support for type pack arguments in type aliases (#83)
- Basic support for require(path) in luau-analyze
- Add a lint warning for table.move with 0 index as part of
TableOperation lint
- Remove last STL dependency from Luau.VM
- Minor VS2022 performance tuning
Co-authored-by: Rodactor <rodactor@roblox.com>
